Scanning B&W with Vuescan - skill me up

All talk about software, scanners, printers, digital backs, etc.

Scanning B&W with Vuescan - skill me up

Postby dave_whatever » Thu Jan 19, 2012 11:40 pm UTC+00:00

I thought I'd throw this open to the floor. I've shot and developed a few sheets of FP4+ which I acquired with a camera. Never really shot proper B&W before.

Anyway, I've come to scanning them. So just wondering how people go about scanning mono these days?

My current E6 scanning workflow is pretty standard - scan in vuescan with the 4990, no adjustments, and output a "raw" (in inverted commas...) tiff file with a colour profile for velvia embedded (which I've previously created from a faust IT8 target), and then do all the work on the scan in some other software, like photoshop/gimp or these days Aperture. Obviously I can bin the colour management step for mono, but anything else I need to be aware of - is outputting from Vuescan in 48bit still advisable? I've also turned off ICE as its not supposed to work with monochrome film. Any other tips? Is leaving the levels and/or black and white points till "post" rather than setting in the Vuescan still the way to go?

Sorry if any of this is a daft question. After shooting exclusively colour transparency for years, the fact that the light things are dark and the dark things are light is kinda blowing my mind a bit. Its like driving in a mirror.
dave_whatever
Forum Hero
 
Posts: 614
Joined: Fri Dec 12, 2008 11:36 am UTC+00:00
Location: Sheffield

Re: Scanning B&W with Vuescan - skill me up

Postby ian-barber » Mon Jan 02, 2017 9:15 pm UTC+00:00

With Vuescan, I find it easier not to do any adjustments in the software. Make sure you scan 16bit greyscale and then do the correction curves in Photoshop
ian-barber
 
Posts: 4
Joined: Mon Jul 11, 2016 10:39 pm UTC+00:00

Re: Scanning B&W with Vuescan - skill me up

Postby rhodej00 » Thu Jan 26, 2017 5:25 pm UTC+00:00

Hi. The Vuescan Bible by Sascha Steinhoff, who created Vuescan, suggests that the negative is first scanned at 4800 spi to produce a RAW file, a .dng. Then this RAW file is scanned to produce the jpg/tiff file. Also this gives you a RAW file which can be used in A.N.Others RAW file converter software.
I have used this method which works OK but is new to me so I am still learning.
Might be worth getting a copy of the Vuescan Bible-about £20 I think.

Vuescan gives lots of options so much experimentation may be necessary to suit your own requirements.

John
John H Rhodes
http://www.johnhrhodes.co.uk
Scottish Photographers
rhodej00
 
Posts: 52
Joined: Fri Dec 01, 2006 4:43 pm UTC+00:00
Location: Salisbury


Return to Digital Workflow

Who is online

Users browsing this forum: No registered users and 2 guests

cron