I was out photographing the snow today, and having a great time. However, after 3 hours, whilst I was working on a panoramic shot with a snowy mounain, a loch, and two swans, I discovered that my trusty Pentax analogue spotmeter had stopped working. Batteries are fine, the light works as well, but the needle doesn't move when I depress the "take reading" button. I had to guess the exposure for that shot, then had to come home to grab a spare meter.
Question is, where can one get these repaired? Production ceased in 1980 I believe, and parts would be difficult to get. Any suggestions as to who might be able to help?
			
			
									
									
						Where to get Pentax Spotmeter V repaired?
- 
				David Rees
 - Forum Hero
 - Posts: 144
 - Joined: Sat Apr 22, 2006 11:43 pm Etc/GMT-1+01:00
 - Location: near Stirling, Scotland
 
- 
				David Evans
 - Forum Hero
 - Posts: 261
 - Joined: Fri Apr 06, 2007 7:54 pm Etc/GMT-1+01:00
 - Location: Settle, North Yorkshire
 
Re: Where to get Pentax Spotmeter V repaired?
Not sure but you may get some leads from here h[url]ttp://www.kyphoto.com/cgi-bin/forum/discus.cgi[/url]
Also I've used Camserve for an SLR lens repair, and they were very good. They might be able to help http://www.camserve.co.uk/ourservices.html
			
			
									
									Also I've used Camserve for an SLR lens repair, and they were very good. They might be able to help http://www.camserve.co.uk/ourservices.html
David
						- 
				George Hart
 - Forum Hero
 - Posts: 115
 - Joined: Thu Aug 24, 2006 9:32 am Etc/GMT-1+01:00
 - Location: Chester, UK
 
- 
				David Rees
 - Forum Hero
 - Posts: 144
 - Joined: Sat Apr 22, 2006 11:43 pm Etc/GMT-1+01:00
 - Location: near Stirling, Scotland
 
Re: Where to get Pentax Spotmeter V repaired?
Thanks David and George -- I shall give them both a call.
			
			
									
									
						- IanG
 - Forum Hero
 - Posts: 478
 - Joined: Wed Jan 03, 2007 2:21 pm Etc/GMT-1+01:00
 - Location: Aegean/West Midlands
 - Contact:
 
Re: Where to get Pentax Spotmeter V repaired?
Pentax have their own repair department, they may be the best option.
Ian
			
			
									
									
						Ian