Interest Check
Posted: Mon Jul 12, 2010 9:45 am Etc/GMT-1+01:00
Hi all,
at work we've been throwing around a few ideas...
We run a BA (Hons) Photography Degree in Suffolk (Near to the coast). The staff here have been throwing around some ideas about opening up some of the equipment to the public over the summer holidays/ other times when students are not using the facilities.
We run a degree that uses both traditional (Analogue) and emerging media (Digital, CGI etc.)
We have 2 darkrooms (Both Colour & B+W, with provision for medium & large (4x5) format). There are processors for RC paper in both darkrooms + a 20" RA4 processor in one. Basically you can dev + print up to 4x5 in colour or B+W (resin or FB), dry, mount etc.
We have a dry to dry roller C41 machine that takes up to 4x5 (I'm working on 8x10)
We have 2 x Studios (One white, one black) with bowens celing system in one, and broncolor pack system in the other.
One digital lab containing 6 Scanning booths comprising 2x Imacon, 1x Nikon & 3x Epson (V700/750 & A3 flatbed & film) Scanners, all connected to intel chip Imacs. The imacons have most holders available for each from 35 up to 4x5. 8 Mac retouching computers around a central work area along with provision for (bring your own) laptop spaces & ports.3 mac printing stations connected to 2x Epson 4880 (A2) and 1x R2400 (A3). All of these machines are colour managed.
There may also be an opportunity to print A1 & A0 inkjets on site.
Large drymounting vaccum presses (One is approx 50" x 70") & large benching area for cutting prints.
Like I said at this point this is just an idea, and i'm looking into what interest there would be, along with how it would be managed. We would probably offer pre booked access paid hourly or daily - and we would then look into what was feasible etc.. It might be an option for some of you to liase with us if you wanted to run a workshop nearby, or organised groups or individuals wanted to use the facilities. At present none of this is established or worked out, so I am not looking for specific dates on when you want to come, but rather trying to see if this is a possible venture for us to look into (we are looking into others too). Statements of interest & feedback, therefore are welcome.
Many Thanks,
Matthew.
at work we've been throwing around a few ideas...
We run a BA (Hons) Photography Degree in Suffolk (Near to the coast). The staff here have been throwing around some ideas about opening up some of the equipment to the public over the summer holidays/ other times when students are not using the facilities.
We run a degree that uses both traditional (Analogue) and emerging media (Digital, CGI etc.)
We have 2 darkrooms (Both Colour & B+W, with provision for medium & large (4x5) format). There are processors for RC paper in both darkrooms + a 20" RA4 processor in one. Basically you can dev + print up to 4x5 in colour or B+W (resin or FB), dry, mount etc.
We have a dry to dry roller C41 machine that takes up to 4x5 (I'm working on 8x10)
We have 2 x Studios (One white, one black) with bowens celing system in one, and broncolor pack system in the other.
One digital lab containing 6 Scanning booths comprising 2x Imacon, 1x Nikon & 3x Epson (V700/750 & A3 flatbed & film) Scanners, all connected to intel chip Imacs. The imacons have most holders available for each from 35 up to 4x5. 8 Mac retouching computers around a central work area along with provision for (bring your own) laptop spaces & ports.3 mac printing stations connected to 2x Epson 4880 (A2) and 1x R2400 (A3). All of these machines are colour managed.
There may also be an opportunity to print A1 & A0 inkjets on site.
Large drymounting vaccum presses (One is approx 50" x 70") & large benching area for cutting prints.
Like I said at this point this is just an idea, and i'm looking into what interest there would be, along with how it would be managed. We would probably offer pre booked access paid hourly or daily - and we would then look into what was feasible etc.. It might be an option for some of you to liase with us if you wanted to run a workshop nearby, or organised groups or individuals wanted to use the facilities. At present none of this is established or worked out, so I am not looking for specific dates on when you want to come, but rather trying to see if this is a possible venture for us to look into (we are looking into others too). Statements of interest & feedback, therefore are welcome.
Many Thanks,
Matthew.
