Page 1 of 1
Lancaster Rectigraph values
Posted: Thu Oct 13, 2011 8:52 pm Etc/GMT-1+01:00
by IanG
Came across two Lancaster Rectigraph lenses today in rather good condition exceept no mounting flanges.
One was a brass 15x12 (24") and the other a silver (aluminium) 12x10 (18"), what's the typical price range for these lenses, they date from 1886-early 1900's.
Ian
Re: Lancaster Rectigraph values
Posted: Thu Oct 13, 2011 11:14 pm Etc/GMT-1+01:00
by Fourtoes
I've just got hold of a 12x15 camera....hint hint nudge nudge wink wink......
Re: Lancaster Rectigraph values
Posted: Fri Oct 14, 2011 8:41 am Etc/GMT-1+01:00
by Charles Twist
So what's it like then?
Charles
Re: Lancaster Rectigraph values
Posted: Fri Oct 14, 2011 9:51 am Etc/GMT-1+01:00
by dave_whatever
I dread to think what a rectigraph is. I certainly wouldn't want a big brass lens on an endoscope

Re: Lancaster Rectigraph values
Posted: Sun Oct 16, 2011 8:33 pm Etc/GMT-1+01:00
by Susie Frith
Hi Ian,
The Rectigraph is a version of the Rapid Rectilinear lens, designed in 1866 by J H Dallmeyer. This is the name that Lancaster gave to their version. Nearly every manufacturer used the design, Kingslake lists 29 different manufacturers' names for the same design!
It has a doublet (two lenses cemented together) either side of the iris, and is usually symmetrical. It was the everyday lens from its introduction up until the anastigmats came in during the late 1890's. Other than this you had a portrait lens of the Petzval type or a basic landscape lens.
They certainly give a super image if you want that 'olde worlde' charm (I do!)
Large lenses hold a good value, but they're not nearly so sort after as the portrait lenses, as so many were made. Also, they have less qudos (sic?). And of course, you need a heafty camera to support a lens of that size!
Susie
Re: Lancaster Rectigraph values
Posted: Mon Oct 17, 2011 12:53 pm Etc/GMT-1+01:00
by IanG
Thanks Susie
In this patricular case the lack of the flanges makes them unattractive as user lenses, although I have 2 large TP shutters that would match them.
Ian
Re: Lancaster Rectigraph values
Posted: Thu Oct 20, 2011 5:06 pm Etc/GMT-1+01:00
by Andrew Plume
IanG wrote:Came across two Lancaster Rectigraph lenses today in rather good condition exceept no mounting flanges.
One was a brass 15x12 (24") and the other a silver (aluminium) 12x10 (18"), what's the typical price range for these lenses, they date from 1886-early 1900's.
Ian
Hi Ian
You can send them to me and I'll very contentedly relieve them from you.........................
or I can do a trade
our friend in West Croydon has the UK's best collection of flanges - available for mating purposes, I'm overdue for a 'mating visit' there, so let me know if I can assist in any way
best
andrew
Re: Lancaster Rectigraph values
Posted: Thu Oct 20, 2011 8:46 pm Etc/GMT-1+01:00
by IanG
They aren't my lenses Andrew, not sure how much the seller wants either, he leaves unpriced until he's sure of the value. . . . . . . . . . .
Ian
Re: Lancaster Rectigraph values
Posted: Fri Oct 21, 2011 8:48 am Etc/GMT-1+01:00
by Andrew Plume
IanG wrote:They aren't my lenses Andrew, not sure how much the seller wants either, he leaves unpriced until he's sure of the value. . . . . . . . . . .
Ian
ok, more than understood
best
andrew
Re: Lancaster Rectigraph values
Posted: Fri Oct 28, 2011 10:53 am Etc/GMT-1+01:00
by Andrew Plume
Ian
I reckon, those on the 'big auction site' will pay in excess of £150 for each of these
Susie - great post btw
regards
andrew