Formatt filters
Posted: Sat Jul 08, 2006 11:08 pm Etc/GMT-1+01:00
Good evening all,
Just a quick warning about Formatt filters. It's best not to use the Formatt sleeves (stiff plastic + card) as storage in the field. A couple months back, I bought an 81B which has seen a fair bit of action since then. It's now badly scratched - not deep gouges, but loads of little marks, all parallel to the edge of the filter (ie an orthogonal cross-hatch). I reckon the cause is fine particulates that get wedged in the cardboard; the stiff plastic outer sleeve then ensures they grind against the resin when the filter is taken out or put in. Best to use a filter wallet if using these filters; alternatively, dust out the sleeve every time, or pull out the cardboard with the filter. Or avoid dusty places.
Charles
Just a quick warning about Formatt filters. It's best not to use the Formatt sleeves (stiff plastic + card) as storage in the field. A couple months back, I bought an 81B which has seen a fair bit of action since then. It's now badly scratched - not deep gouges, but loads of little marks, all parallel to the edge of the filter (ie an orthogonal cross-hatch). I reckon the cause is fine particulates that get wedged in the cardboard; the stiff plastic outer sleeve then ensures they grind against the resin when the filter is taken out or put in. Best to use a filter wallet if using these filters; alternatively, dust out the sleeve every time, or pull out the cardboard with the filter. Or avoid dusty places.
Charles