Page 1 of 1

Crit please, but please, be gentle.

Posted: Sat Jul 30, 2011 11:58 am Etc/GMT-1+01:00
by Mick O'Connell
Hi

My first 5x4 in a few years, I know I made a few mistakes in the taking stage.

Image

I can develop. I don't have use of a DR, so I have to scan, get rid of the Dust and scratches in PS. Oh, and a bit of flare!
I haven't used film for a while and the proprieties of Rodinal has changed a wee bit.

f64 @14 mins 19 secs = Rodinal 1+100 20c @14 mins (-30% Reciprocity) I didn't add for bellows (MP5) but will do next time to get more detail in the foreground velvet.

Any comments and pointers in dev'ing will be appreciated.

Thanks

Mick

Re: Crit please, but please, be gentle.

Posted: Sat Jul 30, 2011 12:41 pm Etc/GMT-1+01:00
by Joanna Carter
With results like that, you certainly haven't lost the knack; very nice :D

Re: Crit please, but please, be gentle.

Posted: Sat Jul 30, 2011 3:46 pm Etc/GMT-1+01:00
by Mick O'Connell
Thanks Joanna

Just reread the post
I didn't add for bellows (MP5)
<---- :? Sorry, Had visions of me waking round with a "Micro Precision Products Limited, 5 x 4 Micro Technical" strapped to my head, listening to some Pink Floyd.

Re: Crit please, but please, be gentle.

Posted: Sun Jul 31, 2011 8:52 pm Etc/GMT-1+01:00
by Andrew Plume
Hi Mick

well............................?

well..................................?

what needs to be discussed or considered?....................

an excellent effort, outstanding, well done you..........................

regards

andrew

Re: Crit please, but please, be gentle.

Posted: Mon Aug 01, 2011 8:40 am Etc/GMT-1+01:00
by Mick O'Connell
Thanks Andrew, appreciated :)

I wonder if members could help me with this:-
Before I take the MPP out in the big bad world. It's not been used for a while and testing the way I'm dev'ing.
I was wondering why the leaves are bleeding into the sky. Also the foggy type thing happening at the tops of the trees.
Placed the inside of the wood burning stove at zone 3

Image

MPP
1/4 sec @f64
Rodinal 1+100 @17 min (N-1.5) <--- Am I asking too much of the dev times?
Hole in the bellows?



Did this on the Horseman, same exposure, same dev.

Image


Please excuse the scanning, trying to crack that too!

Mick