WTB: Jobo paper clip thingy's
-
- Forum Hero
- Posts: 116
- Joined: Tue Aug 11, 2009 9:09 pm Etc/GMT-1+01:00
- Location: London
WTB: Jobo paper clip thingy's
Sorry about the vauge description but I'm not sure what they are called
I'm after two or three clips that slide onto the internal rails in a Jobo drum to hold the paper in place....Some are just like a split tube whilst others have wings on. Either would be good.
Cheers Dave
I'm after two or three clips that slide onto the internal rails in a Jobo drum to hold the paper in place....Some are just like a split tube whilst others have wings on. Either would be good.
Cheers Dave
-
- Forum Hero
- Posts: 116
- Joined: Tue Aug 11, 2009 9:09 pm Etc/GMT-1+01:00
- Location: London
Re: WTB: Jobo paper clip thingy's
Still looking
Cheers Dave
Cheers Dave
-
- Forum Hero
- Posts: 262
- Joined: Thu Feb 08, 2007 7:26 pm Etc/GMT-1+01:00
- Location: Plymouth.
Re: WTB: Jobo paper clip thingy's
Try Firstcall Photographic. If they don`t have them in stock, they might be able to order them for you.
If you are using a print drum to process 8x10 sheet-films, I find the non-winged clip holders easier to use.
http://www.firstcall-photographic.co.uk ... /view-all/
If you are using a print drum to process 8x10 sheet-films, I find the non-winged clip holders easier to use.
http://www.firstcall-photographic.co.uk ... /view-all/
-
- Forum Hero
- Posts: 116
- Joined: Tue Aug 11, 2009 9:09 pm Etc/GMT-1+01:00
- Location: London
Re: WTB: Jobo paper clip thingy's
Still required (all avenues failed)
Cheers Dave
Cheers Dave
Re: WTB: Jobo paper clip thingy's
Try cutting some single core cable (aprox 9.0mm diameter) into a 1½ inch lengths taking out the centre core(s) then cut a slit in the cable with a razor blade or scalpel to fit the rail in the tank. You may have to make the slit slightly wider at the ends to facilitate installation and removal but it worked for me.
Test 'em first
Hope this helps
nn
Test 'em first
Hope this helps
nn
-
- Forum Hero
- Posts: 116
- Joined: Tue Aug 11, 2009 9:09 pm Etc/GMT-1+01:00
- Location: London
Re: WTB: Jobo paper clip thingy's
You may be num but your not dumb....Thanks for the tipnumnutz wrote:Try cutting some single core cable (aprox 9.0mm diameter) into a 1½ inch lengths taking out the centre core(s) then cut a slit in the cable with a razor blade or scalpel to fit the rail in the tank. You may have to make the slit slightly wider at the ends to facilitate installation and removal but it worked for me.
Test 'em first
Hope this helps
nn
Cheers Dave