Page 1 of 1

Darkroom bits for free. ALL GONE NOW

Posted: Tue May 04, 2010 3:24 pm Etc/GMT-1+01:00
by Matthew Rolfe
I have a collection of old equipment that could do with a good home. They aren't being used so they need to go to someone who will use them. I will just list the lot, have a look and get in touch if you are interested. I would prefer not to post, although give me a couple of quid and I will send it by Royal Mail.


- Selection of trays : 3 x 8x10 / 3 x 5x7 / and a few other larger trays if I can find them!!

ALL THE BELOW ARE A BIT OLD AND TIRED, BUT STILL WORK. DON'T EXPECT TO STUMBLE ACROSS A GOLD MINE! :wink:
- Couple of red safe lights

- A Jobo enlarger (colour head) with 50mm lens. Old and tired but still working, with timer. Not a great piece of kit but fun to muck around with.

- Jobo CPE Motorised roller base (two speed with thermostat) Jobo 4531 drum (with clips to hold two 8x10 sheets)

- 3 x 2.5 ltr Dark brown glass chemical bottles

- A selection of Jobo colour processing equipment (just bits and bobs to be honest, currently residing in the loft!)

- A print dryer, I believe it is an Ilford and I have no idea if it works (If there is interest for this I will get the ladder out and get into the loft to check it out.)

- Ilford multigrade filter sets x 2, old and a bit scratched


There are loads of extra little bits that have sat in a big box unused, lisitng all of them would take forever! I guess the best option would be - if you are interested in any of the above, or my other items for sale - to come and collect so you can have a good root around. :D

Regards

Matthew Rolfe

Re: Darkroom bits for free.

Posted: Tue May 04, 2010 3:56 pm Etc/GMT-1+01:00
by IanG
I'd appreciate the darkroom equipment for a workshop facility I'm planning.

Ian

Re: Darkroom bits for free.

Posted: Tue May 04, 2010 5:42 pm Etc/GMT-1+01:00
by Adrian Brewster
Hi Mathew
Looks like you have already found a good home for this stuff but if the Jobo CPE motorised base is still available I can offer a good home and pay the postage.
Thanks
Adrian

Re: Darkroom bits for free.

Posted: Tue May 04, 2010 6:08 pm Etc/GMT-1+01:00
by IanG
Adrian Brewster wrote:Hi Mathew
Looks like you have already found a good home for this stuff but if the Jobo CPE motorised base is still available I can offer a good home and pay the postage.
Thanks
Adrian

That's one of the bits I need :D I'm kitting out a darkroom/workshop facility.

Ian

Re: Darkroom bits for free.

Posted: Wed May 05, 2010 9:54 pm Etc/GMT-1+01:00
by Matthew Rolfe
Ian is taking the lot.

Matthew