FS: Paterson Orbital Processor and motorised base
Posted: Mon Jun 21, 2010 7:15 pm Etc/GMT-1+01:00
Hi, just bought this from a bloke at work whose getting too old and selling off entire darkroom. I know these things are good for film processing but I don't really shoot enough to keep chemicals fresh etc to contemplate cooking my own.
Right that said - we have :-
* Paterson orbital processor in original bag / box with all the red pins and the manual base. Honestly bar a couple of light scratches on the base this could be new. Lid fitting appears perfect. The coloured cups are all present too.
* Paterson motorised base in original bag / box. I've plugged it in just to test - seems to run fine.
* Bonus bits I found in the box :-
2 off 50ml Paterson measuring cylinders
1 off 25ml Paterson measuring cylinder.
2 off 10ml no-name measuring thimbles (they are quite small).
1 off tap conector - doesn't appear to fit anything but left in the box.
There are a couple of marker pen lines on the cylinders etc but these are minimal and would probably be removeable - just mentioned for completeness.
I guess postage will be reasonably expensive due to the bulk - However I can do a meet along the South coast etc to suit instead if that works - up for discussion with purchaser.
Looking for 75 pounds plus the postage as mentioned above.
I've nowhere to host images but I could shoot some / email if really required tho' there are plenty of shots for this well known product on the web .
Thanks - regards Tim.....
PS would like to sell as a job lot - not looking to split.
Right that said - we have :-
* Paterson orbital processor in original bag / box with all the red pins and the manual base. Honestly bar a couple of light scratches on the base this could be new. Lid fitting appears perfect. The coloured cups are all present too.
* Paterson motorised base in original bag / box. I've plugged it in just to test - seems to run fine.
* Bonus bits I found in the box :-
2 off 50ml Paterson measuring cylinders
1 off 25ml Paterson measuring cylinder.
2 off 10ml no-name measuring thimbles (they are quite small).
1 off tap conector - doesn't appear to fit anything but left in the box.
There are a couple of marker pen lines on the cylinders etc but these are minimal and would probably be removeable - just mentioned for completeness.
I guess postage will be reasonably expensive due to the bulk - However I can do a meet along the South coast etc to suit instead if that works - up for discussion with purchaser.
Looking for 75 pounds plus the postage as mentioned above.
I've nowhere to host images but I could shoot some / email if really required tho' there are plenty of shots for this well known product on the web .
Thanks - regards Tim.....
PS would like to sell as a job lot - not looking to split.
