SOLD: Gitzo G2270M Low Profile three way head.
Posted: Sun Aug 22, 2010 5:58 pm Etc/GMT-1+01:00
Item now sold. Thank you.
This is listed on eBay also from 8:00pm today, but please contact me if interested.
Here are the details as posted on eBay:
GITZO G2270M LOW PROFILE THREE WAY PAN AND TILT HEAD.
BOUGHT NEW LAST YEAR. VERY LIGHTLY USED AND NO SCRATCHES, SCRAPES, OR BUMPS OF ANY SORT (EXCEPT YOU CAN SEE SOME RUB MARKS WHERE IT HAS BEEN ATTACHED TO THE TRIPOD).
COMES WITH AN AN OPTIONAL PLATE TO CAMERA 3/8TH SCREW, BUT I HAVE THE STANDARD 1/4" 20 SCREW TO CAMERA. BOTH SCREWS ARE INCLUDED IN THE SALE.
THE TRIPOD HEAD COMES BOXED AND WITH INSTRUCTIONS.
FULL DETAILS CAN BE FOUND HERE http://www.gitzo.com/cms/site/gitzo/hea ... ode=G2270M
WEIGHTS 0.75KGS (1.65LBS) AND SUITABLE FOR LOADS UP TO 5KGS (11LBS) BY GITZO MEASUREMENTS, AND THE GITZO CATALOGUE SAYS IT WOULD BE SUITABLE FOR LOADS OF 12.5KGS (27.5LBS) IF MEASURED ACCORING TO COMPETITORS STANDARDS.
PLEASE BE AWARE THAT GITZO MAKE THE 227# SERIES HEADS AS THREE MODELS - THE G2270M (FOR SALE HERE) WITH A LARGE CAMERA PLATE, THE G2271M WITH A SMALL CAMERA PLATE, AND THE G2272M WITH A GITZO QUICK RELEASE SYSTEM.
THE ONE FOR SALE IS SUITABLE FOR ALL CAMERAS, AND IS PARTICULARLY SUITABLE FOR SOME LARGE FORMAT CAMERAS WITH A LARGE BASE. THAT IS WHAT I BOUGHT THE HEAD FOR, AND THE 3/8" SCREW WAS SO THE CAMERA COULD BE ATTACHED WITHOUT THE NEED TO BUSH A 1/4" SCREW.
There are photographs of the item included on the eBay sale.
New price in UK (Warehouse Express) is £189.95 and in US (B&H) $284.95 after deducting a current $40 rebate on offer by Gitzo in US.
It's listed with a starting price of £50 and there is a Buy Now price of £98 (which is just a fraction over half the new price). Plus postage. If anyone is interested, they can bid or Buy Now via eBay, or if you want to buy it direct I will discount the eBay Buy Now price by 5%.
Thanks. David.
This is listed on eBay also from 8:00pm today, but please contact me if interested.
Here are the details as posted on eBay:
GITZO G2270M LOW PROFILE THREE WAY PAN AND TILT HEAD.
BOUGHT NEW LAST YEAR. VERY LIGHTLY USED AND NO SCRATCHES, SCRAPES, OR BUMPS OF ANY SORT (EXCEPT YOU CAN SEE SOME RUB MARKS WHERE IT HAS BEEN ATTACHED TO THE TRIPOD).
COMES WITH AN AN OPTIONAL PLATE TO CAMERA 3/8TH SCREW, BUT I HAVE THE STANDARD 1/4" 20 SCREW TO CAMERA. BOTH SCREWS ARE INCLUDED IN THE SALE.
THE TRIPOD HEAD COMES BOXED AND WITH INSTRUCTIONS.
FULL DETAILS CAN BE FOUND HERE http://www.gitzo.com/cms/site/gitzo/hea ... ode=G2270M
WEIGHTS 0.75KGS (1.65LBS) AND SUITABLE FOR LOADS UP TO 5KGS (11LBS) BY GITZO MEASUREMENTS, AND THE GITZO CATALOGUE SAYS IT WOULD BE SUITABLE FOR LOADS OF 12.5KGS (27.5LBS) IF MEASURED ACCORING TO COMPETITORS STANDARDS.
PLEASE BE AWARE THAT GITZO MAKE THE 227# SERIES HEADS AS THREE MODELS - THE G2270M (FOR SALE HERE) WITH A LARGE CAMERA PLATE, THE G2271M WITH A SMALL CAMERA PLATE, AND THE G2272M WITH A GITZO QUICK RELEASE SYSTEM.
THE ONE FOR SALE IS SUITABLE FOR ALL CAMERAS, AND IS PARTICULARLY SUITABLE FOR SOME LARGE FORMAT CAMERAS WITH A LARGE BASE. THAT IS WHAT I BOUGHT THE HEAD FOR, AND THE 3/8" SCREW WAS SO THE CAMERA COULD BE ATTACHED WITHOUT THE NEED TO BUSH A 1/4" SCREW.
There are photographs of the item included on the eBay sale.
New price in UK (Warehouse Express) is £189.95 and in US (B&H) $284.95 after deducting a current $40 rebate on offer by Gitzo in US.
It's listed with a starting price of £50 and there is a Buy Now price of £98 (which is just a fraction over half the new price). Plus postage. If anyone is interested, they can bid or Buy Now via eBay, or if you want to buy it direct I will discount the eBay Buy Now price by 5%.
Thanks. David.