Page 1 of 1

SOLD - FS: Complete Jobo CPE-2 Kit

Posted: Fri Feb 04, 2011 3:21 pm Etc/GMT-1+01:00
by Charlie jay
Hi Everyone,

I have finally decided to part with my Jobo CPE-2 processing machine and looking for a good home. I have used it to develop 5x4 C41 sheets for the past 8 months, putting through about 12-15 shots per week with consistent results. Only problems being my own fault. Temps seem accurate motor works fine.

Included in the set up is...
Jobo CPE-2 Processor
8 x Jobo 600ml Bottles ( 3 black, 5 clear)
4 x Jobo 1000ml Bottles (1 black, 3 clear)
4 x 280ml graduates for the machine
1 x 2l measuring jug
1 x pretty full can of Tetenal Protectan spray
1 x Paterson grey 5x7 tray
1 x Jobo colour thermometer
1 x Jobo Unitank 1520
1 x tank core
1 x 35mm/120 reel
1 x Jobo 2509n sheet film reel with 120 & 5x4 'wings' ( basically new - bought from firstcall in october)
1 x 2840 print drum with bottom section (this was used with the 2509n holder to process 5x4 sheet film)

Think thats about it.
This is a very flexible and modular system allowing you to develop 35mm, 120, 6x9cm, 6x12cm and 5x4 sheet films as well as prints up to 12"x16".
I'll consider splitting to the processor and the sheet film tank ONLY if i find buyers for each. Prefer to sell as a set. Perfect for someone with their 'fingers in many photographic pies' and wants to try home colour developing.

£165 inc postage for the lot.
Please PM me to get in line for the 2509n spiral and tank for 5x4 or if you have any more questions and interest.

Thanks,
Charlie

Image
Image
Image

Re: FS: Complete Jobo CPE-2 Kit

Posted: Fri Feb 04, 2011 4:32 pm Etc/GMT-1+01:00
by Dave Tolcher
Charlie, you have PM with expression of interest !

Rgds

Dave

Re: FS: Complete Jobo CPE-2 Kit

Posted: Sat Feb 05, 2011 1:21 am Etc/GMT-1+01:00
by Charlie jay
SOLD