Looking for a recessed lens-board for my Cambo 4x5. Its to fit an Angulon 90mm so around 30mm would be ideal but less would be ok, its in a synchro-compur shutter so I think that is the same as Copal '0' or about 33mm (I'm happy to re-drill).
I'm looking for cheap and functional, even diy. Otherwise I will make one myself.
WTB. Recessed lens board for Cambo/Calumet 4X5.
-
Bill Backhouse
- Posts: 29
- Joined: Thu Jun 02, 2011 9:57 am Etc/GMT-1+01:00
-
IanG
- Forum Hero
- Posts: 478
- Joined: Wed Jan 03, 2007 2:21 pm Etc/GMT-1+01:00
- Location: Aegean/West Midlands
- Contact:
Re: WTB. Recessed lens board for Cambo/Calumet 4X5.
You need to specify which Cambo as there's at least 2 possibly 3 different Cambo types and they don't fit every camera.
Ian
Ian
-
Bill Backhouse
- Posts: 29
- Joined: Thu Jun 02, 2011 9:57 am Etc/GMT-1+01:00
Re: WTB. Recessed lens board for Cambo/Calumet 4X5.
This will be fun... I don't actually know!!!
the board is a 6 3/4" (163mm) square and about 3mm thick with a bit chomped out of the back to make it light tight.
I think it could be an SC but I'm guessing from other pics.
the board is a 6 3/4" (163mm) square and about 3mm thick with a bit chomped out of the back to make it light tight.
I think it could be an SC but I'm guessing from other pics.