lf-photo.org.uk

Is anyone willing to part with a rangefinder cam for an MPP Mk 7 or 8 (both the same fitting) for a 150mm lens?

Matt

Hi Matt.Log on to MPP Users Club you will find all the info you will ever need, All the details on making your own cams,its all there check it out, and its for free. Tombo

Thanks for that, but I could barely make a toast rack in woodwork at school, so making my own cam is a bit beyond me.....

Matt

http://www.mppusers.freeuk.com/

Matt
Take a look at the above for info. on MPP, and its free.
Cams are more complicated than you might think, each being tailored to the individual lens...

Matt

I have had a look at the MPP site and the specifications. I do have some knowledge and experience in metalwork and could make up the item if you are really stuck. However I note that the item may need to be calibrated on the camera and this would probably mean meeting and I do not know where you are in the country. I live in Orpington kent. let me know if I can help.

Alan Golding

Matt,

I could probably make the cam, and have the kit to do it, but as Alan says the difficult bit may be in calibrating it. You know where I live.

Steve