Advice on Manfrotto 410 head
-
- Moderator
- Posts: 491
- Joined: Wed Dec 12, 2007 5:05 pm Etc/GMT-1+01:00
- Location: Burnham, UK
- Contact:
Advice on Manfrotto 410 head
Just wondered if anyone has any experience in fixing a Manfrotto 410 head?
The vertical/horizontal section of mine seized up the other day so disassembled that section, couldn't see anything obviously wrong so reassembled it. It first appeared that it had fixed the problem but am now left with a slight (about 5 degree) rocking movement in that section and can't seem to see what's causing it!
I could just send it to their service dept. for repair but have feeling it's something quite simple... any advice will be gratefully received.
Paul
The vertical/horizontal section of mine seized up the other day so disassembled that section, couldn't see anything obviously wrong so reassembled it. It first appeared that it had fixed the problem but am now left with a slight (about 5 degree) rocking movement in that section and can't seem to see what's causing it!
I could just send it to their service dept. for repair but have feeling it's something quite simple... any advice will be gratefully received.
Paul
When people ask what equipment I use - I tell them my eyes.
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
-
- Founder
- Posts: 1283
- Joined: Wed Mar 29, 2006 7:26 pm Etc/GMT-1+01:00
- Workshop Images: http://grandes-images.com/fr/Paysages/P ... _2009.html
- Location: Plestin-les-Grèves, France
- Contact:
Re: Advice on Manfrotto 410 head
I took mine apart because it had a slight rock. It all went back together again fine. Have you got any bits left over? 

Reassure yourself - stroke an Ebony
-
- Moderator
- Posts: 491
- Joined: Wed Dec 12, 2007 5:05 pm Etc/GMT-1+01:00
- Location: Burnham, UK
- Contact:
Re: Advice on Manfrotto 410 head
I once took a tape cassette player apart which had seized up, put it all back together again only to find that I had a small pile of springs and screws left over... it worked fine for the next 2-3 years!Joanna Carter wrote:Have you got any bits left over?
When people ask what equipment I use - I tell them my eyes.
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
Re: Advice on Manfrotto 410 head
Hi Paul,
I vaguely remember having a slight "looseness" on my 410 not long after I bought it. I resolved it by taking off the covering sticker with the degree graduations on it and tightening the central screw that lies underneath. Of course, which one you need to remove depends on the axis with the slack
Regards,
Mike
I vaguely remember having a slight "looseness" on my 410 not long after I bought it. I resolved it by taking off the covering sticker with the degree graduations on it and tightening the central screw that lies underneath. Of course, which one you need to remove depends on the axis with the slack

Regards,
Mike
-
- Moderator
- Posts: 491
- Joined: Wed Dec 12, 2007 5:05 pm Etc/GMT-1+01:00
- Location: Burnham, UK
- Contact:
Re: Advice on Manfrotto 410 head
Have done all that... spent the best part of 2 hours the other evening taking it apart and reassembling to no avail... thanks for taking the time to reply though Mike.
Paul
Paul
When people ask what equipment I use - I tell them my eyes.
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
Re: Advice on Manfrotto 410 head
Paul,
If you have a small amount of movement then isn't it likely that something is either loose or not fitted correctly?
When you say the vertical section, are you referring to the part that fits to the tripod centre column?
Mike
If you have a small amount of movement then isn't it likely that something is either loose or not fitted correctly?
When you say the vertical section, are you referring to the part that fits to the tripod centre column?
Mike
Re: Advice on Manfrotto 410 head
Hi Paul,
I think you need to take the head apart again and move the nylon gears round to a new position, I have had a rocking movement a couple of times and this as sorted it out, I guess the gears can wear being used in the same place most of the time.
Richard
I think you need to take the head apart again and move the nylon gears round to a new position, I have had a rocking movement a couple of times and this as sorted it out, I guess the gears can wear being used in the same place most of the time.
Richard
-
- Moderator
- Posts: 491
- Joined: Wed Dec 12, 2007 5:05 pm Etc/GMT-1+01:00
- Location: Burnham, UK
- Contact:
Re: Advice on Manfrotto 410 head
@Mike - no it's the top part that gives you the horizontal and vertical axis
@Richard - thanks for that piece of advice Richard will give it a go this evening
Paul
@Richard - thanks for that piece of advice Richard will give it a go this evening
Paul
When people ask what equipment I use - I tell them my eyes.
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
-
- Posts: 99
- Joined: Sun Mar 25, 2007 12:15 pm Etc/GMT-1+01:00
- Location: Lymington, South Coast
- Contact:
Re: Advice on Manfrotto 410 head
Dissemble the head again Paul
Then rotate the external alloy geared cup portion 90 deg or so. The teeth get worn easily and this gives it more life moving the working section. This wear to the soft alloy is one of the drawbacks of the 410 and 405 heads.
Then rotate the external alloy geared cup portion 90 deg or so. The teeth get worn easily and this gives it more life moving the working section. This wear to the soft alloy is one of the drawbacks of the 410 and 405 heads.
Baxter
-
- Moderator
- Posts: 491
- Joined: Wed Dec 12, 2007 5:05 pm Etc/GMT-1+01:00
- Location: Burnham, UK
- Contact:
Re: Advice on Manfrotto 410 head
Thanks for the tip Baxter, will give it one more go... if it doesn't work then it's off to the Manfrotto service centre!
Paul
Paul
When people ask what equipment I use - I tell them my eyes.
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
http://www.paulmitchellphotography.co.uk
http://www.arenaphotographers.com
Re: Advice on Manfrotto 410 head
I have been following this thread with interest as I want to purchase a geared head. I thought about the Manfrotto 410 but almost decided on the 405 as the load capacity was larger.
However from what has been said on this thread it seems that the construction of both 405 and 410 are very similar. Can anyone confirm this?
The Manfrotto 400 is about £100 more expensive than the 405 is it worth the extra money?
Are there any other geared heads similarly priced and of good quality out there?
Thanks in advance for your comments.
nn
However from what has been said on this thread it seems that the construction of both 405 and 410 are very similar. Can anyone confirm this?
The Manfrotto 400 is about £100 more expensive than the 405 is it worth the extra money?
Are there any other geared heads similarly priced and of good quality out there?
Thanks in advance for your comments.
nn

- IanG
- Forum Hero
- Posts: 478
- Joined: Wed Jan 03, 2007 2:21 pm Etc/GMT-1+01:00
- Location: Aegean/West Midlands
- Contact:
Re: Advice on Manfrotto 410 head
No idea of the number of my Manfrotto head but it did need some adjustment, I acquired it second hand around 4 years ago.
Ian
Ian