WANTED: MPP rangefinder cam for 150mm

Anything to sell (WTS) or looking for anything specific (WTB)? Anything advertised on this forum comes with the usual "buyer beware" advice; it is up to the purchaser to assure themselves of the integrity of the supplier and item being sold. It is also the responsibility of the seller to ensure that payment is forthcoming before parting with said item.
Post Reply
Matt_Bigwood
Forum Hero
Posts: 115
Joined: Mon Jan 22, 2007 9:59 pm Etc/GMT-1+01:00
Location: Gloucestershire UK
Contact:
Contact Matt_Bigwood

WANTED: MPP rangefinder cam for 150mm

Post by Matt_Bigwood » Thu Apr 19, 2007 11:56 am Etc/GMT-1+01:00

Is anyone willing to part with a rangefinder cam for an MPP Mk 7 or 8 (both the same fitting) for a 150mm lens?

Matt
Top
Tom Green
Posts: 80
Joined: Wed Jul 12, 2006 8:01 pm Etc/GMT-1+01:00
Location: Wirral

cams

Post by Tom Green » Thu Apr 19, 2007 3:01 pm Etc/GMT-1+01:00

Hi Matt.Log on to MPP Users Club you will find all the info you will ever need, All the details on making your own cams,its all there check it out, and its for free. Tombo :mrgreen:
:Inspiration and Vision make Great Photographs
Top
Matt_Bigwood
Forum Hero
Posts: 115
Joined: Mon Jan 22, 2007 9:59 pm Etc/GMT-1+01:00
Location: Gloucestershire UK
Contact:
Contact Matt_Bigwood

MPP cam

Post by Matt_Bigwood » Thu Apr 19, 2007 6:47 pm Etc/GMT-1+01:00

Thanks for that, but I could barely make a toast rack in woodwork at school, so making my own cam is a bit beyond me.....

Matt
Top
Aynsley Cooper
Posts: 78
Joined: Fri Nov 24, 2006 12:05 pm Etc/GMT-1+01:00
Location: Staffordshire

MPP cams

Post by Aynsley Cooper » Tue Apr 24, 2007 4:14 pm Etc/GMT-1+01:00

http://www.mppusers.freeuk.com/

Matt
Take a look at the above for info. on MPP, and its free.
Cams are more complicated than you might think, each being tailored to the individual lens...
Top
alangolding
Posts: 68
Joined: Sun Nov 05, 2006 3:37 pm Etc/GMT-1+01:00
Location: Orpington Kent

Post by alangolding » Wed Apr 25, 2007 1:51 pm Etc/GMT-1+01:00

Matt

I have had a look at the MPP site and the specifications. I do have some knowledge and experience in metalwork and could make up the item if you are really stuck. However I note that the item may need to be calibrated on the camera and this would probably mean meeting and I do not know where you are in the country. I live in Orpington kent. let me know if I can help.

Alan Golding
Top
SteveH
Forum Hero
Posts: 130
Joined: Mon Apr 24, 2006 8:36 am Etc/GMT-1+01:00
Location: Cotswolds
Contact:
Contact SteveH

Post by SteveH » Wed Apr 25, 2007 3:04 pm Etc/GMT-1+01:00

Matt,

I could probably make the cam, and have the kit to do it, but as Alan says the difficult bit may be in calibrating it. You know where I live.

Steve
Big is beautiful.
Top
Post Reply

Return to “Classifieds”