WTB Spacer ring

Anything to sell (WTS) or looking for anything specific (WTB)? Anything advertised on this forum comes with the usual "buyer beware" advice; it is up to the purchaser to assure themselves of the integrity of the supplier and item being sold. It is also the responsibility of the seller to ensure that payment is forthcoming before parting with said item.
Post Reply
Matthew Rolfe
Posts: 44
Joined: Mon Jul 06, 2009 3:35 pm Etc/GMT-1+01:00

WTB Spacer ring

Post by Matthew Rolfe » Wed Oct 14, 2009 4:48 pm Etc/GMT-1+01:00

Hi

I have just recently purchased a new lens (Nikkor-M 450mm) and the rear spacer ring that came with it is too thin. After I have attached the lens to the lens board the spacer is loose . Obviously the previous owner had a thicker lens board. Does anyone have a spare spacer ring that they would be happy to sell? I am either looking for a thicker ring or another thin one to go with the one I have.

The spacer ring I have is 65mm in diameter but only 6mm thick - 8-10mm would be enough so that it binds to the back of the lens board.
Top
Dave Dawson
Forum Hero
Posts: 116
Joined: Tue Aug 11, 2009 9:09 pm Etc/GMT-1+01:00
Location: London

Re: WTB Spacer ring

Post by Dave Dawson » Wed Oct 14, 2009 9:55 pm Etc/GMT-1+01:00

Go for the technical approach....

Pack it out with a piece of black mounting board 8)

Cheers Dave
Top
Dave Tolcher

Re: WTB Spacer ring

Post by Dave Tolcher » Thu Oct 15, 2009 1:36 pm Etc/GMT-1+01:00

Matt, for the linhof technika board that I had a 450mm nikkor lens on the spacer had to be on the front side otherwise it wouldnt tighten fully. They are a std size I believe.
Top
Matthew Rolfe
Posts: 44
Joined: Mon Jul 06, 2009 3:35 pm Etc/GMT-1+01:00

Re: WTB Spacer ring

Post by Matthew Rolfe » Mon Oct 19, 2009 10:19 pm Etc/GMT-1+01:00

Cheers Dave
Top
Post Reply

Return to “Classifieds”