WTB: DDS & jobo drum/reel

Anything to sell (WTS) or looking for anything specific (WTB)? Anything advertised on this forum comes with the usual "buyer beware" advice; it is up to the purchaser to assure themselves of the integrity of the supplier and item being sold. It is also the responsibility of the seller to ensure that payment is forthcoming before parting with said item.
Post Reply
jennym
Forum Hero
Posts: 171
Joined: Mon Nov 17, 2008 9:56 pm Etc/GMT-1+01:00

WTB: DDS & jobo drum/reel

Post by jennym » Thu Dec 03, 2009 10:57 am Etc/GMT-1+01:00

I am on the lookout for a couple of 2609n reels and a 2521 or 2551 jobo drum for a CPE-2 processor I have just acquired....keen to try it out but it feels a bit scary!
Cheers,
Jenny
Top
Keith Tapscott
Forum Hero
Posts: 263
Joined: Thu Feb 08, 2007 7:26 pm Etc/GMT-1+01:00
Location: Plymouth.

Re: WTB: DDS & jobo drum/reel

Post by Keith Tapscott » Thu Dec 17, 2009 6:28 pm Etc/GMT-1+01:00

jennym wrote:I am on the lookout for a couple of 2609n reels and a 2521 or 2551 jobo drum for a CPE-2 processor I have just acquired....keen to try it out but it feels a bit scary!
Cheers,
Jenny
I`m sure you will be able to easily find one of those tanks and reels, as they are quite popular.
You might find this link useful.
http://www.film-and-darkroom-user.org.u ... php?t=1512
Top
jennym
Forum Hero
Posts: 171
Joined: Mon Nov 17, 2008 9:56 pm Etc/GMT-1+01:00

Re: WTB: DDS & jobo drum/reel

Post by jennym » Thu Dec 17, 2009 11:28 pm Etc/GMT-1+01:00

Thanks Keith,

I have acquired the drums, and once I have reels and chemistry I am set to go...just need to go and take some images to process!
Top
User avatar
IanG
Forum Hero
Posts: 478
Joined: Wed Jan 03, 2007 2:21 pm Etc/GMT-1+01:00
Location: Aegean/West Midlands
Contact:
Contact IanG

Re: WTB: DDS & jobo drum/reel

Post by IanG » Fri Dec 18, 2009 5:51 pm Etc/GMT-1+01:00

Peter Walnes (I'm fairly sure it was his site) has DDS's for £6 each or 6 for £30, at least he did 3 or 3 days ago. Around £8 each is the usual going rate from most reputable dealers if they are in good condition.

Ian
Top
David Evans
Forum Hero
Posts: 261
Joined: Fri Apr 06, 2007 7:54 pm Etc/GMT-1+01:00
Location: Settle, North Yorkshire

Re: WTB: DDS & jobo drum/reel

Post by David Evans » Thu Jan 07, 2010 8:54 pm Etc/GMT-1+01:00

jennym wrote:I am on the lookout for a couple of 2609n reels and a 2521 or 2551 jobo drum for a CPE-2 processor I have just acquired....keen to try it out but it feels a bit scary!
Cheers,
Jenny
Have you tried here http://www.secondhanddarkroom.co.uk/www ... ?p=1&pno=0?
Never tried them myself, and prices may be a bit steep, and they may not have what you are looking for, but apart from that ...!
David
Top
jennym
Forum Hero
Posts: 171
Joined: Mon Nov 17, 2008 9:56 pm Etc/GMT-1+01:00

Re: WTB: DDS & jobo drum/reel

Post by jennym » Thu Jan 07, 2010 9:05 pm Etc/GMT-1+01:00

Many thanks David. Funnily enough I had a quick look at their website earlier today, but they don't have the tanks or reels I am looking for. I only need a reel to get me going, so I will probably get a new one when I am ready to order chemicals unless a used one has appeared by then. I'm itching to get going!

Jenny
Top
David Evans
Forum Hero
Posts: 261
Joined: Fri Apr 06, 2007 7:54 pm Etc/GMT-1+01:00
Location: Settle, North Yorkshire

Re: WTB: DDS & jobo drum/reel

Post by David Evans » Thu Jan 07, 2010 11:49 pm Etc/GMT-1+01:00

jennym wrote:Many thanks David. Funnily enough I had a quick look at their website earlier today, but they don't have the tanks or reels I am looking for. I only need a reel to get me going, so I will probably get a new one when I am ready to order chemicals unless a used one has appeared by then. I'm itching to get going!

Jenny
Hi Jenny

I'm trying to think of other possible suppliers, so here are a few:

http://www.rhdesigns.co.uk/ for new equipment - based in Hawes would you believe!

There's also Andrew Skilling who can be contacted at sales@asafoto.co.uk who deals in used studio and darkroom gear. No website. Based near St Helens.

Finally there's http://vintageclassiccamera.com/index.p ... 20a&page=2 but I can't get there website to load properly.

Good luck with your search!

David
David
Top
Post Reply

Return to “Classifieds”